AXIS M3007–PV
Events
Events
The Axis product can be congured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that denes how and when the action is triggered is called an Action Rule.
Available action rule triggers and conditions include:
• Applications – Use installed applications to trigger the rule. See Applications, on page 31.
• Detectors
- Day/Night Mode – Trigger the rule when the product switches between day mode (IR cut lter on) and night
mode (IR cut lter off). This can for example be used to control an external infrared (IR) light connected
to an output port.
- Motion Detection – Trigger the rule when motion is detected. See Motion Detection, on page 28.
- Tampering – Trigger the rule when tampering is detected. See Camera Tampering, on page 28.
• Hardware
- Network – Trigger the rule if network connection is lost or restored. This can for example be used to start
recording to the SD card.
• Input Signal
- Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on
the Live View Page, on page 9 . This can for example be used to validate actions during product installation
and conguration.
• PTZ
• Storage
- Available – Trigger the rule when the storage device is unmounted or removed. This can for example be used to
send maintenance notications.
- Full – Trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be
overwritten to prevent the storage device from becoming full.
- Locked – Trigger the rule if the storage device is locked (write protected).
• System
- System Initializing – Trigger the rule when the product is being started. This can for example be used to send a
notication when the product restarts.
• Time
- Recurrence – Trigger the rule periodically. See Recurrences, on page 36. This can for example be used to
upload an image every 5 minutes.
- Use Schedule – Trigger the rule according to the selected schedule. See Schedules, on page 36.
Available actions include:
• PTZ Control
- Preset Position – Go to a preset position.
- Guard Tour – Start a guard tour. See Guard Tour, on page 27.
• Record Video – Record video to a selected storage.
33