Filter
Top Products
10
AXIS M32 Series
The Live View page
How you customize the Live View page determines which buttons are visible. Not all the buttons described below show up
unless configured to do so.
Pan/Tilt/Zoom controls
The following controls are available if digital PTZ is enabled, see Pan Tilt Zoom (PTZ), on page 19. The administrator can enable
and disable the controls for specific users under System Opt
ions > Security > Users > User List.
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile on the Live View
page. Stream profiles are configured under Video > Stream Profiles, see Stream Profiles, on pag
e 14 for more information.
The Snapshot button saves a snapshot of the video image on display. Right-click on the video image to save it in JPEG
format on your computer. This button is primarily intended for use when the AMC viewer toolbar is not available.
AXIS Media Control
The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet Explorer only. See AXIS Media Control
(AMC),
on page 12 for more information. AMC displays the following buttons:
The Play button c
onnects to the Axis product and starts playing a media stream.
The St
op button stops the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the image is saved can be
specified in the AMC Control Panel.
Click the View Full Screen button and the video image will fill the entire screen. Press Esc (Escape) on the
computer keyboard to cancel full screen view.
The Record button is used to record the current video stream. The location where the recording is saved can
be specified in the AMC Control Panel.
Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the
mouse pointer.
Click the Cent
er mode button and click on a position in the image to center the camera view on that position.
Pan, Tilt and Zoom bars — Clicki
ng a position directly on the bar moves the camera view directly to the new posi-
tion in one smooth movement. Clicking on the arrows at the ends of a bar
causes an incremental change. Clicking
Zoom out to overview image will set the camera to the minimum zoom position. In this position, the camera
cannot pan or tilt.
Click the Ct
rl panel button to open the PTZ control panel which provides additional PTZ controls.
User-defined buttons can also appear in th
e Control panel, see Advanced, on page 23.
Click the Ho
me button to steer the camera to the Home position. The Home position is defined under
PTZ> Preset Positions in the web interface.