Filter
Top Products
AXIS P13 Network Camera Series Installation Guide Page 5
ENGLISH
Dimensions
Install the hardware
Connect the cables
1. Connect external input/output devices if required, such as alarm devices. See page 19 for infor-
mation on the terminal connector pins.
2. Connect an active speaker and/or external microphone if required.
3. Connect the camera to the network using a shielded network cable.
4. Connect power, using one of the methods listed below:
• PoE (Power over Ethernet). PoE is automatically detected when the network cable is
connected.
• Connect an external power adapter to the power connector block; see Unit connectors,
on page 18 for wiring information.
5. Check that the indicator LEDs indicate the correct conditions. See the table on page 20 for
more details. Note that the Status LED can be configured to be unlit during normal operation.
Model H x W x D Weight
AXIS P1311 46 x 78 x 176 mm (1.8” x 3.1” x 6.9”) 584 g (1.29 lb)
AXIS P1343 46 x 78 x 192 mm (1.8” x 3.1” x 7.6”) 585 g (1.29 lb)
AXIS P1344 46 x 78 x 205 mm (1.8” x 3.1” x 8.1”) 620 g (1.37 lb)
AXIS P1346 46 x 78 x 198 mm (1.8” x 3.1” x 7.8”) 630 g (1.39 lb)
AXIS P1347 46 x 78 x 206 mm (1.8” x 3.1” x 8.1”) 680 g (1.5 lb)
!
IMPORTANT! - AXIS P1311/P1343/P1344/P1346/P1347 is designed for indoor and
outdoor use. To use the camera outdoors, it must be installed in an approved outdoor
housing. Please see www.axis.com for more information on outdoor housings.