Axis Communications P3384VE Security Camera User Manual


  Open as PDF
of 69
 
AXIS P3384–VE Fixed Dome
Events
- Guard Tour – Start a guard tour. See Guard Tour on page 29.
• Record Video – Record video and audio to a selected storage. To record audio, use AAC audio encoding and make sure that
audio is enabled in the selected stream prole.
• Send Images – Send images to a recipient.
• Send Notications – Send a notication message to a recipient.
• Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and congured
under System Options > Network > SNMP.
• Send Video Clip – Send a video clip to a recipient.
• Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and conguration.
• WDR Mode – The WDR Mode or Lightnder Mode can be turned on when the action rule is triggered. This action may
be used to change between these modes automatically.
Add Recipients
The product can send media les and messages to notify users about events. Before the product can send media les or notication
messages, you must dene one ore more recipients. For information about available options, see Recipient Types on page 39.
To add a recipient:
1. Go to Events > Recipients and click Add.
2. Enter a descriptive name.
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.
Recipient Types
The following recipients are available:
Recipient Use with action Notes
Email
Send Images
Send Notication
Send Video Clip
An email recipient can contain multiple email addresses. For
more information about email recipients, see Set Up Email
Recipients on page 40
FTP
Send Images
Send Video Clip
HTTP
Send Images
Send Notication
Send Video Clip
39
 previous next