Axis Communications P5414E Security Camera User Manual


  Open as PDF
of 64
 
AXIS P5414–E PTZ Dome Network Camera
Technical Specications
Function/group
Item
Specications
Casing
IP66– and NEMA 4X–rated metal casing (aluminum), clear dome (PC), sunshield (ASA)
memory
256MB RAM, 128 MB Flash
Power
Power over Ethernet Plus (PoE+) IEEE 802.3at Type 2 Class 4, max 30W
20–28 V DC max 16 W
Connectors
RJ-45 for 10BASE-T/100BASE-TX PoE
Terminal block for DC input
Terminal block for 4 congurable alarm inputs and outputs
Terminal block for mic/lin input and line output
Local storage
Supports SD cards with up to 64 GB of storage. For best recording performance, use an
SDHC or SDXC card with speed class 10. (card not included)
Support for recording to network share (Network Attached Storage or le server)
Operating
conditions
Temperature: –20 °C to 50 °C (–4 °F to 122 °F)
Humidity 10–100% RH (condensing)
Approvals
EN 50121–4, IEC 62236–4, EN 55022 Class B, EN 61000-6-1, EN 61000-6-2,
EN 55024, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B,
C-tick AS/NZS CISPR 22 Class B, KCC KN22 Class B, KN24, IEC/EN/UL 60950-1,
IEC/EN/UL 60950-22, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14,
IEC 60068-2-27, IEC 60068-2-30, IEC 60068-2-78, IEC 60529 IP66, EN 50581,
NEMA 250 Type 4X, ISO 4892-2
Weight
3.5 kg (7.7 lb)
General
Included
accessories
Installation Guide, AVHS Authentication key, installation and management software CD,
Windows decoder 1–user license
Video
management
software (sold
separately)
AXIS Camera Companion (included), AXIS Camera Station and video management
software from Axis’ Application Development Partners (not included). For more
information, see www.axis.com/products/video/software
Optional
accessories
Smoked dome cover
T8123 High PoE-30W Midspan 1-port
AXIS T94P01B Corner Bracket
AXIS T8310 Video Surveillance Control Board
AXIS T90A Illuminators
Installation Display
Multi-user decoder license pack
Connectors
I/O Terminal Connector
6–pin terminal block for:
• Digital Input
• Digital Output
• Auxiliary power and ground (GND)
1 2 3 4 5 6
Function Pin Notes
Specications
GND
1
Ground
12 V DC Power
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Max load = 50 mA
61
 previous next