Filter
Top Products
AXIS P5414–E PTZ Dome Network Camera
Repainting the Camera
Repainting the Camera
The covers can be repainted to match the installation environment.
The material used in the covers is ASA Geloy XTWM206. Use paint suitable for this material.
1. Remove the two top cover screws.
2. Use a thin palette knife to release the locking tabs while pulling the top cover straight upwards to remove the cover.
3. Remove the two bottom cover screws and remove the bottom cover.
4. Mask the locking tabs in the bottom cover and the three screw covers.
5. Repaint the top cover, the bottom cover, the screw covers, and the conduit cover.
6. Assemble in the reverse order.
1
2
1
3 3 4
5
6
4
7
1
Top cover screw
2
Top cover
3
Locking tab
4
Bottom cover screw
5
Bottom cover
6
Conduit cover
7
Screw cover
57