Filter
Top Products
AXIS Q60 Series
LED Indicators
LED
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during rmware upgrade.
Amber/red Flashes amber/red if network connection is unavailable
or lost.
Red Flashes red for rmware upgrade failure.
Status
Green Shows steady green for 10 seconds for normal operation
after restart.
Midspan LED Indicators
LED
Color
Indication
Unlit No camera connected.
Green Steady when camera connected, normal operation.
Green, ashing Slow ash when overcurrent or short circuit condition
on the port.
Port
Green, ashing
Fast ash when input voltage is out of range or other
internal error.
AC Green Steady when AC power input connected.
Connectors
For specications and operating conditions, see page 13.
Network connector - RJ45 Push-pull Connector (IP66). Supports High Power over Ethernet (High
PoE). Use the supplied midspan.
NOTICENOTICE
NOTICE
• The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the midspan shall be shielded (STP) and intended for their specic use.
Make sure that the midspan is properly grounded. For information about regulatory
requirements, see RegulatoryInformation, on page 2.
• To comply with the IP66-rated design of the camera and maintain the IP66 protection,
the supplied RJ45 Push-pull Connector (IP66) shall be used. Alternatively, use the RJ45
IP66-rated cable with premounted connector which is available from your Axis reseller.
Do not remove the plastic network connector shield from the camera.
12