Filter
Top Products
AXIS Q604 Series
Connectors
SD Card Slot
Supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC
or SDXC card with speed class 10.
Install the Hardware
NONO
NO
TICETICE
TICE
• The AXIS product shall be connected using a shielded network cable (STP). All cables
connecting the product to the midspan shall be shielded (STP) and intended for their
specic use. Make sure that the midspan is properly grounded. For information about
regulatory requirements, see Regulatory Information on page 2 .
• Mount the product with the dome cover facing downward.
• Be careful not to scratch, damage or leave ngerprints on the dome cover because this
could decrease image quality. If possible, keep the protective plastic on the dome cover
until the installation is complete.
The Axis product can be installed with the cables routed through or along the wall or ceiling.
Read all the instructions before installing the product. Some installation steps would benet from
being completed together because they require removal of the dome cover.
A hardware installation can include the following:
• The product is supplied with a clear dome cover (premounted). A smoked dome cover is
available as an accessory. To replace the dome cover, see page 18.
• A standard or high capacity SD card (not included) can be used to store recordings locally
in the product. To install an SD card, see page 19.
• To install the product using the hard ceiling mount, see page 19.
• To install the product using the drop ceiling mount, see page 20.
• To install the product using a compatible bracket from AXIS T91A Mounting Accessories
(sold separately), see page 23.
• To install the supplied midspan, see page 25.
Replace the Dome Cover
Replacing the dome cover is only necessary if you want to use the smoked dome cover or if the
dome cover is scratched or damaged. Spare dome covers can be purchased from your Axis reseller
1. Loosen the dome ring screws and remove the dome cover.
18