Filter
Top Products
AXIS Q1931–E Thermal Network Camera
Hardware Overview
• Input/Output (I/O) devices
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP
rating. For more information, see Multi-Connector Cable (sold separately), on page 47.
Power Connector
Terminal connector for connecting AC/DC power supply.
SD Card Slot
A microSD card (not included) can be used for local recording with removable storage. For more information, seeTechnical
Specications, on page 53.
NOTICENOTICE
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click Unmount.
Control Button
The control button is used for:
• Resetting the product to factory default settings. See page 46.
• Connecting to an AXIS Video Hosting System service. See page 39. To connect, press and hold the button for about 1
second until the Status LED ashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See page 39. To connect, press and hold the button for about 3 seconds.
LED Indicators
LED
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during rmware upgrade.
Amber/red Flashes amber/red if network connection is unavailable or lost.
Red Flashes red for rmware upgrade failure.
Status
Green Shows steady green for 10 seconds for normal operation after restart.
6