Filter
Top Products
1. Plug the AC adapter into the wall outlet or surge protector.
Plug the DC connector into the DC power jack on the rear of
the Slideshow Viewer.
2. Connect the audio video cable to the TV and or audio
system. Connect the yellow plug on the TV to the “Video In”
port; and the 3.5mm plug to your “Audio In” port. (If your
TV does not have a 3.5mm audio in port, you may require a
3.5mm-to-RCA audio adapter.)
3. Connect the audio video cables to the back of the
Slideshow Viewer.
4. Turn on the TV and change the input source on the TV to
the desired input channel (consult your TV manual for more
information on selecting the right source). When the correct
source is selected, a message prompting you to insert a
memory card will appear.
5. The Slideshow Viewer is now ready for use.
Hardware Installation (TV)
5
1
2
3
4
5
EN
EN