Dinion
XF
| Installation Manual
Bosch Security Systems | 2004-01 | V1.0
EN | 10
Note
If a short circuit is detected on the lens connector, the on-screen display
(OSD) failure message LENS SHORT CIRCUIT is shown. The lens circuit
is automatically disabled to avoid internal damage. Remove the lens
connector and check the pin connections.
Bosch
Bosch
Pin Video iris lens DC iris lens
1 Supply (11.5V ±0.5, 50mA max.) Damp -
2 Not used Damp +
3 Video signal 1Vpp 1kOhm Drive +
4 Ground Drive -
DinionXFD_Nv1_0.book Page 10 Friday, January 7, 2005 10:56 AM