Bosch Appliances NDC-225-P Security Camera User Manual


 
IP Camera 200 Series Advanced Mode | en 49
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
It is only necessary to change the white point offset for special
scene conditions.
Main frequency and Operation environment
Select 50 Hz or 60 Hz as the main frequency, and Indoor or
Outdoor for the operation environment.
Exposure/frame rate
Auto exposure/frame rate: the camera automatically sets
the framerate. The camera tries to maintain the selected
default shutter speed as long as the light level of the scene
permits.
Select a minimum frame rate from 4 to 30 fps.
Fixed exposure: allows a user-defined shutter time.
Select the shutter speed when exposure control is set to
fixed (1/30, 1/50, 1/60, 1/100, 1/120, 1/250, 1/500, 1/
1000, 1/2500, 1/5000, 1/7500, or 1/15000).
Note:
Shutter time is affected by frame rate in auto framerate mode.
For example, if the frame rate is 30 IPS, the longest shutter
time available is 1/30s.
Default
Click Default to set all video values to their factory setting.
6.4.4 Audio
Select the microphone or line-in connector as the Audio input
or switch it off. Adust the Input volume with the slider.
Switch the Audio output On or Off.
6.4.5 Installer Options
Disable the Camera LED on the camera to switch it off.
Enable Mirror image to obtain a mirror image display of the
camera picture.