Filter
Top Products
32 en | Installation FLEXIDOME HD
AM18-Q0615 | v1.0 | 2012.10 Installation Manual Bosch Security Systems
5.8.2 Tilt
For vertical adjustment (tilt):
1. Loosen the two screws in the camera module wings with
the supplied screwdriver bit (1).
2. Swing the camera module between the wings. Do not
rotate more than 100°.
3. Tighten the two screws in the camera module wings with
the supplied screwdriver bit (1).
4. For extra secure locking, tighten (hand-tight) the two
socket head screws in the side of the camera module
wings with the supplied allen key (2).
5. Click the two wing covers into place.
x2
x2
x2