Bosch Appliances NWC-0800 Digital Camera User Manual


 
MegaPixel IP CamerasSafety | en 3
Bosch Security Systems User Manual F.01U.064.422 | V 1.0 | 2007.03
1Safety
1.1 Important safety instructions
Read, follow, and retain for future reference all of the following safety
instructions. Heed all warnings on the unit and in the operating instructions
before operating the unit.
1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any
instructions provided with the unit. Generally, using a dry cloth for
cleaning is sufficient, but a moist fluff-free cloth or leather shammy may
also be used. Do not use liquid cleaners or aerosol cleaners.
2. Heat Sources - Do not install the unit near any heat sources such as
radiators, heaters, stoves, or other equipment (including amplifiers)
that produce heat.
3. Water - Do not use this unit near water, for example near a bathtub,
washbowl, sink, laundry basket, in a damp or wet basement, near a
swimming pool, in an outdoor installation, or in any area classified as a
wet location. To reduce the risk of fire or electrical shock, do not
expose this unit to rain or moisture.
4. Object and liquid entry - Never push objects of any kind into this unit
through openings as they may touch dangerous voltage points or short-
out parts that could result in a fire or electrical shock. Never spill liquid
of any kind on the unit. Do not place objects filled with liquids, such as
vases or cups, on the unit.
5. Lightning - For added protection during a lightning storm, or when leav-
ing this unit unattended and unused for long periods, unplug the unit
from the wall outlet and disconnect the cable system. This will prevent
damage to the unit from lightning and power line surges.
6. Controls adjustment - Adjust only those controls specified in the oper-
ating instructions. Improper adjustment of other controls may cause
damage to the unit. Use of controls or adjustments, or performance of
procedures other than those specified, may result in hazardous radia-
tion exposure.
7. Overloading - Do not overload outlets and extension cords. This can
cause fire or electrical shock.
8. Power cord and plug protection - Protect the plug and power cord from
foot traffic, being pinched by items placed upon or against them at
electrical outlets, and its exit from the unit.
9. Power disconnect - Units with or without ON/OFF switches have power
supplied to the unit whenever the power cord is inserted into the
power source; however, the unit is operational only when the ON/OFF
switch is in the ON position. The power cord is the main power discon-
nect device for switching off the voltage for all units.