Filter
Top Products
Integrated IR Bullet Camera Installation | en 15
Bosch Security Systems, Inc. Installation Manual | 2.0 | 2011.06
3 Installation
1. Select a mounting surface that is strong enough to support
the camera and that is far from electric or magnetic fields
as well as high temperatures.
2. Connect the camera to either a 12VDC (recommended for
best picture and the most stable camera operation) or 24
VAC regulated power supply (not included).
3. Connect the BNC cable to your video monitor.
4. Face the camera away from the sun or any bright or
reflective light. Excess light on the lens may cause smear
on the picture and possible damage to the CCD.
5. Tighten the four (4) mounting screws of the bracket.
Figure 3.1 Connection
CAUTION!
To prevent humidity problems, the camera must be installed in
dry conditions.
CAUTION!
To ensure reliable operation in wet or moist conditions, the
cable leads should be sealed once connected.