Filter
Top Products
4
Place your BT eFrame close enough to a mains power wall socket so that the cable will reach.
1 Set up the eFrame
• Loosen the knob on the back of the frame and move the
stand to adjust the angle of the display. You can position
the stand in portrait or landscape format. Make sure you
tighten the knob securely after adjustment.
• Plug the mains power adaptor into
the side of the BT eFrame, then plug
the other end into the wall socket
and switch the power on.
Only use the cables provided.
The Welcome screen is displayed (Fig. 1).
Setting up
Fig. 1
Adjustment knob Stand
8557 BT eFrame QSG [4].indd 4 1/5/08 12:32:04