Filter
Top Products
13
USING THE SETUP MENU TO CHANGE SETTINGS
The main purpose of the SETUP mode is to allow you to change the
settings of the camera’s parameters (12-13 dierent ones are available)
so your Trophy Cam operates exactly the way you want it to. You will do
this by entering the SETUP Menu and pressing the keys below the LCD
display, which will show you each parameter and its setting.
Changing Parameter Settings in SETUP Mode
A wide range of options or “parameters” are provided to allow you to set
the Trophy Cam to your operational preferences. To change the setting of
any parameter you must rst switch to the SETUP mode. Once in SETUP
mode, pressing the MENU button will allow you to select any parameter
and change its setting. The name of the parameter and its current setting
will be shown on the LCD. Pressing the RIGHT or LEFT key scrolls to the
next or previous parameter (RIGHT key to move on to the next parameter
and LEFT key to go back to the previous parameter), and pressing the
UP or DOWN key lets you select a dierent setting for the currently
displayed parameter. Once you have selected your preferred new setting
for a parameter, press the OK button to save the new setting (actually
change it). When have are nished changing the settings of one or more
parameters, press MENU again to exit the SETUP menu. MENU can also
be pressed anytime you want to cancel changing a parameter’s setting
after a new setting has been selected (but OK has not been pressed yet).
After setting the parameters to your preferences, be sure to move the
switch to ON to begin actually taking photos or videos. No images will
be captured if the switch is left in the SETUP position (unless you press the
RIGHT/Shot key after exiting the menu)-in fact, the camera will power o
automatically after a few seconds with no key pressed.