Filter
Top Products
6
enabled software to automatically show a map pinpointing each
camera’s location when a group of photos are reviewed on a computer.
Especially useful for those who setup multiple NatureView Cams to
monitor large or widely separated areas.
• Multi Flash Mode (LED Control)- prevents overexposed flash photos
in close range applications
• Hybrid Capture Mode-allows both still photos and videos to be
captured at each trigger, up to highest resolution settings for each.
• NV Shutter-user can select shutter speed for images captured at night
allowing control over brightness vs. ability to stop motion
• Camera Operating Mode can be limited to Day only, Night only, or 24
HRs
• Close Focus capability with included close-up lenses (250mm/460mm)
And many more features such as Super HD Video (1080p) with Audio,
widescreen or fullscreen format still photos, imprintable camera name
(user set) along with current data including temperature, moon phase and
barometric pressure.
Applications
The NatureView Cam can be used as a wildlife camera for research or
wildlife observation. It is also suitable for security/surveillance usage.
PARTS AND CONTROLS
The NatureView Cam provides the following connections for external
devices: USB port, SD card slot, A/V Out, and external DC power in (pg
7, Fig. 1).
A 3-way power switch is used to select the main operating modes: OFF,
SETUP, and ON (pg 7, Fig. 2).
A control key interface with six keys is primarily used in SETUP mode to
select operational functions and parameters. As shown on the next page,
these keys are: UP, DOWN, LEFT, RIGHT, OK and MENU. Four of the keys
can also perform a second function (shortcut operations in SETUP mode) in
addition to their main function: The DOWN key can be used to set the camera
to Photo mode (still camera icon), and the UP key can set the camera to
Video mode (movie camera icon). The RIGHT key also serves as the manual