Bushnell 119466 Digital Camera User Manual


 
18
Parameter
Settings
(Bold=default)
Description
Interval
10S (second)
default,
with a 60M
(minute) to1S
(second) range
of settings
available.
(60M-1M
are set in
one minute
increments,
59S-1S are set
in one second
increments)
Selects the length of time that the
camera will “wait” until it responds to
any additional triggers from the PIR after
an animal is first detected and remains
within the sensor’s range. During this
user set “ignore triggers” interval, the
camera will not capture photos/videos.
This prevents the card from filling
up with too many redundant images.
Settings begin with 10 second default
when parameter is first selected. Note:
after setting down past “1S”, settings start
over at “60M”.
Sensor Level
Normal, High,
Low
Selects the sensitivity of the PIR sensor.
The “High” setting will make the camera
more sensitive to infrared (heat) and
more easily triggered by motion, and the
“Low” setting makes it less sensitive to
heat and motion. The High setting can
be useful when the ambient temperature
is warm (making it more difficult for the
sensor to detect animals), and the Low
setting may help in cold weather if the
camera is being triggered too often by
anything warmer than the surroundings.