Filter
Top Products
6
GETTING STARTED
INSERTING THE BATTERY
Remove the battery cap by lifting the battery door tab and then rotating counter clockwise. Insert a CR-2 3-volt
lithium battery into the compartment positive end first, then replace the battery cap.
NOTE: It is recommended that the battery be replaced at least once every 12 months.
ADJUSTING THE EYEPIECE
Your Legend
®
1200 ARC
™
is constructed with an adjustable eyepiece (+/- 2 Diopter Adjustment) that allows one to
focus the LCD display relative to the image. Simply rotate the eyepiece until the reticle and object distanced to are
in focus to your eye.
OPERATIONAL SUMMARY
While looking through the 6x eyepiece, depress the power button once to activate the in-view Liquid Crystal
Display (LCD). Place the aiming circle (located in the center of the field of view) upon a target at least 5 yards away,
depress and hold the power button down until the range reading is displayed near the bottom of the in-view display.
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,
you can release the power button. e crosshairs surrounding the aiming circle will disappear once the power button
has been released (i.e. the laser is no longer being transmitted). Note: Once activated, the LCD will remain active and
display the last distance measurement for 30 seconds. You can depress the power button again at any time to distance
to a new target. As with any laser device, it is not recommended to directly view the emissions for long periods of time
with magnified lenses. e maximum time the laser is transmitted (fired) is 10 seconds. To re-fire, press the button
down again.