Bushnell 201361 Film Camera User Manual


 
8
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,
you can release the POWER/FIRE button. The crosshairs surrounding the circle will disappear once the POWER/FIRE
button has been released (i.e. the laser is no longer being transmitted).
PinSeeker (LCD Indicator -
) Ever have trouble getting distance to the flag? This advanced mode allows easy acquisition
of the flag without inadvertently getting distances to background targets (i.e. trees) that have stronger signal strength.
Press the POWER/FIRE button to turn the unit on. Next, align the aiming circle
reticle onto the flag that you want distance to. Then, press and hold the POWER/
FIRE button and move the laser slowly over the flag or desired object until a circle
surrounds the flag indicator. If the laser beam recognized more than one object
(i.e. flag and background trees), distance of the flag will be displayed and a circle
will surround the PinSeeker indicator informing the user that distance to the flag (i.e.
closer object) is being displayed in the LCD (as seen below). There may be times
when only the laser beam only sees one object in its path. In this case, the distance
will be displayed, but because more than one object was not acquired, a circle will
not surround the flag indicator.
TIP: While pressing the POWER/FIRE button, you can move the device slowly
from object to object and intentionally force the laser to hit multiple objects to
ensure that you are only displaying the closest of the objects recognized by the
laser.
Once the device has shut off, the unit will always default back to the last mode
used.