FEATURES
The CABELA’S VLR’s sophisticated digital technology allows you to select between various units of
measure and targeting modes. In addition, your CABELA’S VLR’s LCD incorporates illuminated indicators
that advise you when the laser is active and when the battery charge is low. A summary of these features
is presented below:
UNIT OF MEASURE OPTIONS
The CABELA’S VLR can be used to measure distances in yards or meters. The unit of measure indicators
are located in the upper right portion of the LCD. To select between yards and meters, look through the
monocular, depress the “mode” button (left side of the unit underneath the Cabela’s VLR by Bushnell logo)
and hold it down for approximately 2 seconds. If you are changing from yards to meters, a change in
unit of measure will be indicated by the illumination of the letter M for METER indicator while the YD for
YARD indicator is turned off. If you are changing from meters to yards, the opposite will occur. Note: The
CABELA’S VLR will return to the last setting used, each time the unit is turned on.
TARGETING MODES
The CABELA’S VLR incorporates exclusive targeting modes that allow you to adjust the performance
parameters of the unit to suit your specific situation and environment. The different targeting modes
available are listed below:
Standard (LCD Indicator - none): This setting allows most targets to be distanced up to 570 yards. Used
for moderately reflective targets that are typical of most distancing situations. The minimum distance in
the standard mode is 10 yards.
5