Bushnell PinPro Film Camera User Manual


  Open as PDF
of 76
 
12
TROUBLE SHOOTING TABLE
If unit does not turn on – LCD does not illuminate:
• Depresstrigger.
• Checkandifnecessary,replacebattery.
If unit powers down (display goes blank when attempting to power the laser):
• Thebatteryiseitherweakorlowquality.Replacethebatterywithagoodqualityalkalinebattery.
Heavy Duty alkaline batteries are NOT recommended.
The last range reading is still displayed before ranging another target:
• Thelastrangereadingdoesnotneedtobeclearedbeforeranginganothertarget.
Simply aim at the new target using the red dot sighting system and depress the trigger.
If target range cannot be obtained:
• MakesureLCDisilluminated.
• Makesurethatthetriggerisbeingdepressed
• Makesurethatnothing,suchasyourhandornger,isblockingtheobjectivelenses
(lenses closest to the target) that emit and receive the laser pulses.
• Makesureunitisheldsteadywhiledepressingtrigger.
• Makesureareectiveprismisinstalledontopoftheagasthisproductwasdesignedspecically
for courses with reflective prisms.
 previous next