Filter
Top Products
Mounting
and
Detaching
the
Lens
See your camera's instructions for details on
mounting and detaching the lens.
<$
After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
electrical contacts from getting scratched.
1$
If the contacts get soiled, scratched,
or
have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
'*'
If the contacts get soiled or have fingerprints
on
them, clean them with a soft cloth.
If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
index and the
0 index of the dust cap as shown
in
the diagram, and turn clockwise. To remove
it, reverse the order.
E-4
To
shoot in autofocus mode, set the focus mode
switch to AF.
To
use only manual focusing, set the focus mode
switch
to
MF, and focus
by
turning the focusing
ring.
The
focusing ring always works, regardless
of
the focus mode.
[l]AfterautofocusinginONESHOTAFmode,focus
manuaUyby pressing the shutter button halfway
and turning the focusing ring. (Full-timemanOal
focus) ,