Filter
Top Products
Setting Digital Functions
•
Press the <Z> button.
•
Turn the <
6
> dial or press the
<
V
> key to select the ISO speed.
•
When “Auto” is selected, the ISO
speed is set automatically. When
you press the shutter button
halfway, the ISO speed setting
will be displayed.
•
Press the <B> button.
•
Press the <U> key to select
the white balance, then press
<0>.
Q Auto
W Daylight
E Shade
R Cloudy, twilight, sunset
Y Tungsten light
U White fluorescent light
I Flash
O Custom
Low ISO
ISO100
200
400
800
1600
High ISO
For bright scenes and still
subjects (less noise and
finer grain).
For low light and moving
subjects (more grain).
B: White BalanceN
Z
: ISO SpeedN
Shooting Operation
Viewfinder Information
ISO speed
ISO speed
White balance correction
AF points
Focus confirmation
light
Aperture
Max. burst
AE lock
Flash-ready/FE lock
Exposure level indicator
Shutter speed
Flash exposure
compensation
Monochrome shooting
AF point display indicator <
.
>
<B>
White balance
selection button
Access lamp
<S> AF point
selection button
<A> AE lock/
FE lock button
<O> Aperture/Exposure
compensation button
Viewfinder
eyepiece
Dioptric adjustment knob
LCD monitor
<S> Cross keys
Shutter button
Mode Dial
Depth-of-field
preview button
Built-in flash/
AF-assist beam
Red-eye
reduction/
Self-timer lamp
<D>
Flash button
<6> Main Dial
Power switch
<Z> ISO speed
set button
Main Dial pointer
Aperture
ISO speed
Shutter speed
White balance
correction
Image-recording quality
Shots remaining
White balance
Picture Style
Flash exposure
compensation
Metering mode
Shooting mode
Drive mode
White balance
bracketing
Exposure level
indicator
AF mode
Battery check
zxcn
OK NG
Shooting Settings Display
Nomenclature
Creative Zone Modes
Basic Zone Modes
d:
Program AE
All the settings necessary for
shooting are set automatically.
You just press the shutter button,
and the camera does the rest.
•
Select the shooting mode to suit your
subject.
•
Aim an AF point on the subject.
•
Press the shutter button halfway to
focus.
•
Check the display.
•
Compose the shot and press the
shutter button completely.
1 Full Auto
2 Portrait
3 Landscape
4 Close-up
5 Sports
6 Night Portrait
7 Flash Off
You can set the shutter speed
and/or aperture and change the
exposure as desired. By
changing the camera settings,
you can obtain various effects.
•
Set the Mode Dial to <d>.
The camera automatically sets the shutter speed and aperture
in the same way as the <1> mode. The shooting procedure is
the same as with Basic Zone modes.
C
r
e
a
t
i
v
e
Z
o
n
e
B
a
s
i
c
Z
o
n
e
s: Shutter-priority AE
•
Set the Mode Dial to <s>.
•
Turn the <
6
> dial to set the desired
shutter speed, then focus the subject.
s
The aperture will be set automatically.
•
If the aperture display blinks, turn
the <6> dial until it stops blinking.
f
: Aperture-priority AE
•
Set the Mode Dial to <f>.
•
Turn the <6> dial to set the desired
aperture, then focus the subject.
sThe shutter speed will be set
automatically.
•
If the shutter speed display blinks, turn
the <
6
> dial until it stops blinking.
Using the Built-in Flash
In Basic Zone Modes
If necessary, the built-in flash will pop-up automatically in low-light
or backlit conditions. (except in the <3> <5> <7> modes)
Creative Zone
Modes
Press the <D>
button to pop up
the built-in flash,
then shoot.
ISO Speed
Wide-angle: 18 mm Telephoto: 55 mm
100
Approx. 1-3.7m (3.3-12.1ft) Approx. 1-2.3m (3.3-7.5ft)
400
Approx. 1-7.4m (3.3-24.3ft) Approx. 1-4.6m (3.3-15.1ft)
1600
Approx. 1-14.9m (3.3-48.9ft) Approx. 1-9.3m (3.3-30.5ft)
(using EF-S18-55mm f/3.5-5.6 lS lens)
Built-in Flash Range
E: AF ModeN
•
Press the <ZE> button.
•
Press the <U> key to select the
AF mode, then press <0>.
X (One-Shot AF):
For still subjects
9 (AI Focus AF):
Switches the AF mode automatically
Z (AI Servo AF):
For moving subjects
•
Press the <S> button.
•
Press the <S> key to select the
AF point.
•
While looking at the viewfinder,
you can select the AF point by
turning the <6> dial until the
desired AF point flashes in red.
•
Pressing <0> toggles the AF
point selection between the
center AF point and automatic AF
point selection.
S AF PointN
•
Press the <Wq> button.
•
Press the <V> key to select the
metering mode, then press <0>.
q
Evaluative metering:
Standard metering mode
w
Partial metering:
Approx. 10% at center
e
Center-weighted average
metering:
Metering weighted at the center
and averaged for the entire scene
q Metering ModeN
•
Press the <Yij> button.
•
Press the <U> key to select the
drive mode, then press <0>.
u: Single shooting
i: Continuous shooting
: 10-sec. self-timer *
l: 2-sec. self-timer
q: Continuous shots after
self-timer *
* The < > and <q> drive modes
can be selected in all shooting
modes.
i Drive ModeN
Playback Operation
Magnify
Select image
B
U
Reduce
Protect
Erase
Shooting Information
x
L
y
y
u
u
4- or
9-image
Index
Menu [Protect images]
Folder number -
File number
Aperture
Shutter speed
Protect
Exposure compensation amount
Flash exposure
compensation amount
Metering mode
Shooting mode
ISO speed
White balance
Date and time
Original decision (image
verification) data appended
White balance correction
Histogram
(Brightness/RGB)
Color space
Picture Style and
settings
File size
Image-recording
quality
Playback number/
Total images recorded