Filter
Top Products
Changing Shooting Function Settings
167
z Choose [IS Settings], then press the m
button.
z Press the op buttons to choose [IS
Mode], then press the qr buttons to
choose an option.
Turning Off the Powered IS Function
Powered IS reduces subtle camera shake when shooting movies at max
telephoto. However, shooting a moving subject while walking, or such things
as severe camera movement may cause unexpected results in the movie. In
such cases, set Powered IS to [Off].
z Choose [IS Settings], then press the m
button.
z Press the op buttons to choose
[Powered IS], then press the qr buttons
to choose [Off].
Grid lines will not be recorded on the image.
Changing the IS-Mode Settings
Continuous
Automatically sets the optimal
image stabilization for the scene
(Intelligent IS) (p. 185).
Shoot Only*
Image stabilization is only active
at the moment of shooting.
Off Turns off image stabilization.
* Setting changes to [Continuous] when shooting
movies.
If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
[Powered IS] settings will be disabled if [IS Mode] is set to [Off].
COPY