Filter
Top Products
ENG-8
Tips on Using the Image Stabilizer
• The Image Stabilizer cannot compensate for a
blurred shot caused by a subject that moved.
•
Set the STABILIZER switch when you are
using a tripod. If the Stabilizer switch is set to ,
the image stabilizer function may introduce errors.
•
Set the STABILIZER switch to when you are
taking pictures using the Bulb setting (long
exposures). If the STABILIZER switch is set to ,
the image stabilizer function may introduce errors.
• The Image Stabilizer might not be fully effective
in the following cases:
•You shoot while riding on a bumpy road.
•You move the camera dramatically for a
panning shot in Mode 1.
•You shoot using techniques other than
following shots in Mode 2.
• The Image Stabilizer consumes more power
than normal shooting, so fewer shots can be
taken if you use the function.
•
The image stabilizer operates for about two
seconds even when your finger is off the shutter
button. Do not remove the lens while the stabilizer
is in operation.This will cause a malfunction
.
•
With the EOS-1V/HS, 3, ELAN 7E/ELAN 7/30/33,
ELAN 7NE/ELAN 7N/30V/33V, ELAN II/ELAN
IIE/50/50E, REBEL 2000/300, IX, and D30, the Image
Stabilizer will not work during self-timer operation.
• When using a tripod, set the STABILIZER switch
to prevent errors.
• The stabilizer is equally effective for hand-held
photography and photography with a monopod.
• The Image Stabilizer function also operates
when the lens is used with the EF12 II or EF25
II Extension Tube, and the EF1.4X II Extender.
•
With Extender EF2X II attached to the lens, the
Image Stabilizer will work with the following cameras:
EOS-1Ds Mark III, EOS-1Ds Mark II, EOS-1Ds,
EOS-1D Mark lll, EOS-1D Mark II N, EOS-1D
Mark II, EOS-1D, EOS 40D, 30D, 20D, 20Da, 10D,
5D, DIGITAL REBEL XSi/450D, DIGITAL REBEL
XTi/400D DIGITAL, DIGITAL REBEL XT/350D
DIGITAL, DIGITAL REBEL/300D DIGITAL, D60,
D30, EOS DCS1, DCS3, D2000, D6000, EOS-
1V/HS, EOS-1N/DP/HS/RS, 3, ELAN 7E/ELAN
7/30/33, ELAN 7NE/ELAN 7N/30V/33V, ELAN
II/ELAN IIE/50/50E, REBEL X/REBEL XS/500,
REBEL G/500N, REBEL 2000/300, REBEL
Ti/300V, REBEL T2/300X, REBEL K2/3000V, IX,
IX Lite/IX7, 3000/88, 5000/888
• Pictures may look distorted after being taken
depending on the camera, but this doesn't affect
shooting.
• If you set the camera’s Custom Function to
change the assigned button to operate the AF,
the Image Stabilizer will operate when you press
the newly assigned AF button.
COPY