Filter
Top Products
-6
E
4. Image Stabilizer
If you set the camera’s Custom Function to change the assigned button to
operate the AF, the Image Stabilizer will operate when you press the newly
assigned AF button.
1 2
➡
OFF ON
You can use the image stabilizer in AF or MF mode.
1. Set the STABILIZER switch to ON.
• If you are not going to use the image stabilizer function, set the switch
to OFF.
2. When you press the shutter button halfway, the Image Stabilizer will start
operating.
• Make sure the image in the viewfinder is stable, press the shutter
button the rest of the way down to take the picture.
02-7594_ENG 10.2.15 5:11 PM Page 6
COPY