Filter
Top Products
3
Advanced Operations
79
5
Determine the exposure.
● Set the shutter speed or aperture value
manually.
● If the exposure level indicator 〈〉is
flashing at the 〈2
+
〉 or 〈
–
2〉 position, the
exposure is over- or under-exposed by
more than two stops.
6
Take the picture.
● Compose the picture, then press the
shutter button down fully.
You can set the camera so that you can set the shutter speed or aperture value in
1/3-stop increments. (C.Fn-4 →124)
Standard exposure : This is the standard reference point for a correct
exposure.
Underexposure : Decrease the shutter speed or reduce the aperture
value.
Overexposure : Increase the shutter speed or increase the aperture
value.
Manual Exposure