Filter
Top Products
Using the GPS Function
113
When the camera is turned off, it will continue to receive a signal from GPS
satellites for a certain interval of time, and record the route taken. Based on
the received signals, the location information and shooting date for a single
day will be recorded in a GPS log file, separate from images. The log files can
be used with the included software (p. 2) to view the route travelled on a map.
Since this function consumes battery power even when the camera is off, the
battery level may be lower than expected when using the camera. Charge the
battery as necessary, or keep a charged spare battery (sold separately) with
you for shooting.
Set [GPS] to [On].
z Follow Steps 1 and 2 on p. 111 to change
the setting.
Choose a setting.
z Press the op buttons or turn the 7 dial
to choose [GPS Logger], then press the
qr buttons to choose [On].
Complete the setting.
z When you press the n button, a
message about the logger function will
appear on the screen. After checking the
message, press the m button.
Turn off the camera.
XAfter a message appears on the screen
about the logger function, the camera will
turn off.
XEven when the camera is turned off, the
indicator will blink to notify you that the
logger function is operating.
Recording the Camera’s Location Information
(Logger Function)
COPY