Filter
Top Products
ENG-2
❹
0612Ni
©
CANON INC. 2012
3. Hood (sold separately)
The EW-43 hood cuts out unwanted light and protects
the front of the lens from rain, snow, and dust.
Please attach the hood securely by either screwing it
into the lens’ lter thread (43 mm in diameter) located
at the front of the lens or screwing it into the lter
thread (43 mm in diameter) of a lter that is attached
to the lens (g.
❹
).
•
Please attach and detach the hood and filter
only with the camera turned OFF.
•
When attaching or detaching the hood, grasp
the base of the hood to turn it. To prevent
deformation, do not grasp the rim of the hood to
turn it.
4. Filters (sold separately)
A filter is attached by either screwing it into the lens’
filter thread or the front filter thread of the hood (43
mm in diameter).
•
Only one filter may be attached.
•
The hood and filter can be attached in any order.
Specifications
Focal Length/Aperture
22mm f/2
Lens Construction 6 groups, 7 elements
Minimum Aperture
f/22
Angle of View
Diagonal: 63°30′
Vertical: 37°50′
Horizontal: 54°30′
Min. Focusing
Distance
0.15 m/0.49 ft.
Max. Magnification 0.21x
Field of View
Approx. 72 x 109 mm/
2.83 x 4.29 inch
(at 0.15 m/0.49 ft.)
Filter Diameter 43 mm
Max. Diameter and
Length
60.9 x 23.7 mm/
2.40 x 0.93 inch
Weight Approx. 105 g/3.7 oz
Hood EW-43 (Sold Separately)
Lens Cap E-43
Dust Cap Lens Dust Cap EB
Case LP811 (Sold Separately)
•
Equivalent to 35 mm in the 35mm film format.
•
The lens length is measured from the mount
surface to the front end of the lens. Add 19,5 mm
when including the lens cap and dust cap.
•
The size and weight listed are for the lens only,
except as indicated.
•
Extenders cannot be used with this lens.
•
Aperture settings are specified on the camera.
•
All data listed is measured according to Canon
standards.
•
Product specifications and appearance are subject
to change without notice.
C OPY