Filter
Top Products
Using AF to Focus (AF Method)
244
The AF point (or zone) selection will
change in the direction you tilt <9>.
If you press <0>, the center AF
point (or center Zone) will be
selected.
You can also use the <6> and
<5> dials to select the AF point.
3
Focus the subject.
Aim the AF point over the subject and
press the shutter button halfway.
X
The Live View image will turn off, the
reflex mirror will go back down, and AF
will be executed. (No picture is taken.)
X When focus is achieved, the beeper
will sound and the Live View image
will reappear.
X The AF point used to focus will light
up in green.
X If focus is not achieved, the AF point
will blink in orange.
4
Take the picture.
Check the focus and exposure, then
press the shutter button completely to
take the picture (p.216).
When [Quick mode] is set, [Continuous AF] will automatically be set to
[Disable].
Quick mode cannot be set for movie shooting.
You cannot take a picture during autofocusing. Take the picture while the
Live View image is displayed.
COPY