Canon 9176B002 Camcorder User Manual


 
Preparations 21
4 Charging will start when the
camcorder is turned off.
If the camcorder was on, the
green POWER/CHG indicator
will go out when you turn off the
camcorder. After a moment,
the POWER/CHG indicator will
turn on in red (battery pack
charging). The red POWER/
CHG indicator will go out when
the battery pack is fully
charged.
Fully charging the supplied battery pack will take approximately
5 hours and 35 minutes.
If the indicator flashes, refer to
Troubleshooting
(A 162).
To remove the battery pack
1 Slide d in the
direction of the arrow and hold it
pressed down.
2 Slide the battery pack and
then pull it out.
IMPORTANT
Turn off the camcorder before connecting or disconnecting the com-
pact power adapter. After turning off the camcorder, important data is
updated in the memory. Be sure to wait until the green POWER/CHG
indicator goes out.
Do not connect to the camcorder’s DC IN terminal or to the compact
power adapter any electrical equipment that is not expressly recom-
mended for use with this camcorder.
POWER/CHG (charge) indicator
BATTERY RELEASE switch
COPY