Filter
Top Products
Changing Shooting Functions
137
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
● Select [AF-assist Beam], then press the
qr buttons to select [Off].
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
● Select [Review], then press the qr
buttons to select an option.
● If you select [Off], the image will not
display.
● If you select [Hold], the image displays
until you press the shutter button halfway.
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
●
Select [Review Info], then press the
qr
buttons to select an option.
Detailed Displays detailed information (p. 45).
Focus
Check
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as
in “Checking the Focus” (p. 109).