Canon A1100ISP Digital Camera User Manual


 
86
You can select from among three image quality settings.
Select the image quality.
After pressing the m button, press the
op buttons to select .
Select an option.
Press the qr buttons to select an option,
then press the m button.
XThe setting will display on the screen.
Image Quality Table
Estimated Shooting Time
Changing the Image Quality
Image Quality
(Recording Pixels/Frame Rate)
Content
640 x 480 pixels, 30 frames/sec. For shooting standard quality movies.
640 x 480 pixels, 30 frames/sec. LP
The image quality will be lower than with ,
but you can record twice the length.
320 x 240 pixels, 30 frames/sec.
Since the number of the recording pixels is
smaller, the image quality will be lower than
with , but you can record three times the
length.
Image Quality
(Frame Rate)
Shooting Time
128 MB (Supplied) 2GB 8GB
1min. 4sec. 16min. 47sec. 1hr. 7min. 6sec.
2 min. 7 sec. 33 min. 2 sec. 2 hrs. 12 min. 3 sec.
3min. 1sec. 46min. 33sec. 3hrs. 6min. 4sec.
Based on Canon’s testing standards.
Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
COPY