Filter
Top Products
SolutionCause of error
•
Open the delivery section cover (2) of
the upstream trimmer.
•
Open the top cover (1).
•
Open the A and F2 transport unit,
and remove the jammed booklet.
•
Reposition the A and F2 transport
unit, and close the top cover (1) and
the delivery section cover (2) to restart
the printing.
A booklet jam has occurred at the en-
trance of the two-knife trim section.
•
Open the top cover (1).
•
Open the F2 transport unit and re-
move the jammed booklet.
•
Reposition the F2 transport unit and
close the top cover (1) to restart the
printing.
A booklet jam has occurred in the two-
knife trim section.
•
Open the top cover (1).
•
Open the F2 transport unit and re-
move the jammed booklet.
•
If necessary, also hold the E handle
and lift the conveyor.
•
Reposition the E and F2 transport
unit, and close the top cover (1)) to
restart printing.
A booklet jam has occurred at the exit of
the two-knife trim section.
* If the operator panel displays the message 'Empty the two-knife trimmer waste box.'
while the delivery tray is not full, then trim waste may block the sensor.
Chapter 4 - Troubleshooting26
Overview of possible errors