Canon A3000 IS Film Camera User Manual


 
73
Changing the Tone of an Image (My
Colors)
You can change the tone of an image to sepia or black and white when
shooting.
1
Choose My Colors.
After pressing the m button, press the op
buttons to choose .
2
Choose an option.
Press the qr buttons to choose an option,
then press the m button.
X The setting you chose will display on the
screen.
Custom Color
The contrast, sharpness, and color saturation in an image can be chosen
and set at 5 different levels.
Follow Step 2 above to choose , then
press the l button.
Press the op buttons to choose an option,
then press the qr buttons to choose a
value.
The more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
Press the l button to accept the setting.
My Colors Off
Vivid
Emphasizes the contrast and color saturation for a vivid
impression.
Neutral Tones down the contrast and color saturation for neutral hues.
Sepia Sepia tones.
B/W Black and white.
Custom Color
You can adjust contrast, sharpness, and color saturation etc. to
your preference.
The white balance cannot be set in the and modes (p. 72).
COPY