Canon CA-560 Camcorder User Manual


 
Editing
90
E
VIDEO
S(S1)-VIDEO
OUTPUT
AUDIO
L
R
S-150 S-video Cable
STV-250N Stereo Video Cable
A/V IN/OUT
IN/OUT
MIC
DC IN
9.5V
S
Recording from a VCR, TV or Other Camcorder
(Analog Line-in)
You can record a TV program or a video played on your VCR or analog
camcorder (for digital camcorders, see p. 88) onto a tape in the OPTURA Pi, if the
TV or other device has audio/video outputs.
If an anomalous signal is sent from the TV or VCR, the images recorded on the
tape may also be anomalous (although it may not appear so on the TV image),
or not recorded at all.
You are unable to dub tapes recorded with the copyright protective signal.
1. Connect the camera to the VCR, TV or other camcorder.
2. Prepare the TV and VCR.
Set the TV/Video selector on the television to Video.
Turn on the VCR. Load your recorded cassette, and put the VCR in playback
pause mode.
See your TV and VCR instruction manuals for details.
3. Turn the camera’s POWER switch to VCR, and load a blank
cassette.
Preparations
VIDEO
OUTPUT
AUDIO
L
R
STV-250N Stereo Video Cable
A/V IN/OUT
IN/OUT
MIC
DC IN
9.5V
S
#4_OPTURA Pi_E(79-99) 1/25/00 13:42 Page 90 (1,1)