Filter
Top Products
111
E
Editing
Converting Analog
Signals into Digital Signals
(Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Connecting the Devices
Turn off all devices before starting the connections. Unload the tape from the camcorder.
Refer also to the instruction manual of the connected device.
You can also connect a VCR with S (S1)-VIDEO terminal ( 43).
Turning On the Analog-Digital Converter
Press the MENU button and select [VCR SETUP]. Select [AV DV/ ]
(MVX45i) or [AV DV] (MVX40i), set it to [ON] and press the MENU button.
CAMERA
PLAY (VCR)
CARD CAMERA CARD PLAY
MVX45i
MENU
(70)
VCR SETUP AV DV/
•••••
OFF
MVX40i
AV DV
••••••••
OFF
AUDIO
VIDEO
R
L
Signal flow
Commercially available DV cable
Signal flow
STV-250N Stereo Video
Cable (supplied)
Digital video device