Filter
Top Products
PROCEDURE 4 : Press the "SET" button to start
Press "SET" button to start writing the firmware update.
Precautions :
If you wait more than 5 minutes between Procedures 3 and 4, the camera will cancel
the menu and turn off using its Auto Power Off function when you press the MENU
button.
In this case the firmware is not updated. To update the firmware please return to
PROCEDURE 2.
Once the update starts, the indicator LED will cycle from to .ORANGE GREEN
The message shown here will be displayed on the LCD monitor until the
firmware update is complete.
The update will take approximately 60 seconds.
Do not turn the power off during the firmware writing operation. Do not
open the CF card slot cover, press any camera buttons and give camera
body a shock during the firmware writing operation.
The indicator lamp goes off and the camera turns off automatically.
This completes firmware update.
You can select [Firm Update] from Play menu after updating. Once you
have successfully updated the firmware, you cannot update it again.
The message shown on the right will be displayed on the LCD monitor.
If you wish to use the CF card for taking pictures, initialize the card.