4
Setting the Date/Time
1 Turn the camera on (p. 3).
2 Select the item you wish to set
using the W or X button and
set its value using the S or T
button (a).
3 Confirm that the correct time
is displayed and press the
SET button (b).
The date/time can also be set in the
Set up menu (p. 16).
z You will hear a start-up sound and see the start-up image when you
turn on the power (Advanced Guide: p. 117). However, when starting
with the viewfinder display, the start-up image is not displayed and
there is no start-up sound. Also the start-up image does not appear
when the viewfinder display is on in Shooting mode (Advanced Guide:
p. 16) or the A/V OUT terminal is connected to a TV.
Turning on the camera without the start-up sound and image.
z Press and hold the button, then turn on the power. You can also
turn the power on with the LCD monitor closed.
Î
See the Advanced Guide: Time Zone settings (p. 24)
When you turn on the camera the first time, and when the lithium date/
time battery charge is low, the [Date/Time] menu appears.
Î
See the Advanced Guide: Mute (p. 31)
a
b
Î
See the Advanced Guide: Replacing the Date Battery (p. 135)
Preparations
