Filter
Top Products
19
2.
Connecting the camera to a computer.
1. Connect the supplied interface cable to the computer's USB
port and to the camera's DIGITAL terminal.
1. Use the toggle on the wrist strap to open the terminal cover.
2. With the facing in the direction shown, insert the interface
cable all the way.
2. Slide the camera's mode switch to
(playback) and turn on the power.
The camera and computer will be able
to communicate.
Always grasp the sides of the connector when
disconnecting the interface cable from the camera's
DIGITAL terminal.
USB Port
Interface Cable
DIGITAL Terminal
If the Digital Signature Not Found window appears,
click [Yes]. The USB driver will automatically finish installing
onto the computer when you attach the camera and open a
connection.
Downloading Images to a Computer