Filter
Top Products
20
2.
Connecting the camera to a computer.
1. Connect the supplied interface cable to the computer's USB
port and to the camera's DIGITAL terminal.
1. Slip your fingernail under the upper end of the camera's
terminal cover and pull it open.
2. With the facing in the direction shown, insert the interface
cable all the way.
2. Slide the camera's mode
switch to (playback)
and turn on the power.
The camera and computer
will be able to
communicate.
Always grasp the sides of the connector when
disconnecting the interface cable from the camera's
DIGITAL terminal.
USB Port
Interface Cable
DIGITAL Terminal
Interface Cable
If the Digital Signature Not Found window appears,
click [Yes]. The USB driver will automatically finish installing
onto the computer when you attach the camera and open a
connection.