Filter
Top Products
24
Installing the Battery
Insert the lithium coin battery (CR2025) into the wireless controller before
use.
1.
Slip a fingernail into ( ) and
press in the direction of the
arrow while slipping another
fingernail into ( ) and
removing the battery holder.
2.
Place the battery in the holder
with the "+" side up ( ) and
replace the holder.
Operating the Wireless Controller
Other than the operations listed above, all of the buttons perform the same
functions as the corresponding buttons on the camera.
However, functions requiring the user to press two buttons at the same
time can only be performed with the camera.
For battery removal instructions and handling precautions, see the
Advanced Guide (p. 16).
Using the Wireless Controller
Store the lithium coin battery out of the reach of children.
Pressing this button toggles
between transferring to a
computer and playing back
on the LCD monitor.
The information display
mode advances (Standard—
Detailed—Off) each time you
press this button.
Remote Control
Sensor
Transmitter
170CUGBook(Basic-Advanced).book Page 24 Tuesday, June 21, 2005 10:02 PM