Filter
Top Products
ENG-9
STABILIZER
STABILIZER
MODE
12
STABILIZER
ON OFF
Press the shutter button
down halfway to enable
stabilization.
● Make sure the image in the
viewfinder is stable, then
press the shutter button the
rest of the way down to take
the picture.
6. Image Stabilizer
You can use the image stabilizer in AF or MF mode.
Set the STABILIZER switch
to ON.
● If you are not going to use the
image stabilizer function, set
the switch to OFF.
Select the stabilizer mode.
● MODE 1: Corrects vibrations
in all directions. It is mainly
effective for shooting still
subjects.
● MODE 2: Corrects vertical
camera shake during
following shots in a horizontal
direction, and corrects
horizontal camera shake
during following shots in a
vertical direction.
STABILIZER
MODE
FOCUS PRESET
12
02-7524_ENG 10.2.13 9:39 AM Page 9
COPY