Canon EF 24-105mm f/3.5-5.6 IS Camera Lens User Manual


  Open as PDF
of 17
 
ENG-11
You can use the image stabilizer in AF or MF
mode.
This function provides optimal image stabilization
depending on shooting conditions (such as
shootingstillsubjectsandfollowingshots).
1 Set the STABILIZER switch to ON.
● If you are not going to use the image stabilizer
function,settheswitchtoOFF.
2
When you press the shutter button halfway,
the Image Stabilizer will start operating.
● Makesuretheimageintheviewnderisstable,
thenpresstheshutterbuttontherestoftheway
downtotakethepicture.
6.
Image Stabilizer
● The Image Stabilizer cannot compensate for a
blurred shot caused by a subject that moved.
● The Image Stabilizer may not be fully effective
if you shoot from a violently shaking vehicle or
other transportation.
● TheImageStabilizerconsumesmorepower
thannormalshooting,resultinginfewershots
and a shorter movie shooting time.
● Whenshootingastillsubject,itcompensatesfor
camera shake in all directions.
● It compensates for vertical camera shake during
followingshotsinahorizontaldirection,and
compensates for horizontal camera shake during
followingshotsinaverticaldirection.
● Whenyouuseatripod,theImageStabilizer
shouldbeturnedofftosavebatterypower.
● Evenwithamonopod,theImageStabilizerwill
be as effective as during hand-held shooting.
However,dependingontheshootingenvironment,
the Image Stabilizer effect may be less effective.
● Theimagestabilizerfunctionalsooperateswhenthe
lensisusedwithanExtensionTubeEF12IIorEF25II.
● Ifyousetthecamera’sCustomFunctionto
changetheassignedbuttontooperatetheAF,
theImageStabilizerwilloperatewhenyoupress
thenewlyassignedAFbutton.
COPY
 previous next