Filter
Top Products
216
3 Custom Function Settings
C.Fn II -6 Shutter curtain sync.
0: 1st-curtain synchronization
1: 2nd-curtain synchronization
The flash fires immediately before the exposure ends. When this is
combined with a slow sync speed, you can create a trail of light such as
from car headlights at night.
This Custom Function can be used to obtain 2nd-curtain sync effects
even with EX-series Speedlites which do not have this feature.
C.Fn II -7 Flash firing
Enables or disables the firing of an external flash or non-Canon flash
connected to the PC terminal.
0: Enable
1: Disable
Convenient when you want to use the external flash’s AF-assist beam
only. Note that whether or not the AF-assist beam is emitted depends on
the C.Fn III -15 setting.
C.Fn II -8 Viewfinder info. during exposure
0: Disable
1: Enable
The viewfinder information will be displayed even during an exposure.
Displays the exposure setting, number of remaining shots, etc., during
continuous shooting.
If 1 is set and you press the shutter button completely, note that the flash
will fire a total of two times right before the exposure ends.
When using 2nd-curtain sync, set the shutter speed to 1/50 sec. or
slower. If the shutter speed is 1/60 sec. or faster, 1st-curtain sync will be
applied even if 1 is set.
When the shooting mode is set to “Bulb”, even if setting 1 is set, it will not
take effect.
COPY