Filter
Top Products
27
Loading and Unloading Film
Press the < > and < > buttons
simultaneously.
The LCD panel will display the
icon and the film speed.
Setting the Film Speed
• If the film is not loaded properly, the film transport indicator < > will blink
and the shutter will not work. Reload the film properly.
• Infrared film can also be used. (→p.82)
If the film speed displayed does not match the film speed or if the film is not DX-
coded, see “Setting the Film Speed Manually” on page 73.
In hot and humid environments, do not remove the film packaging until you are
ready to load the film.
The frame counter can either count up or count down. (C.Fn-8-1→p.103)
C.Fn
C.Fn 3 can prevent the ISO film speed from being set automatically with the
DX code. (→p.99)
C.Fn
The camera sets the film speed automatically within ISO 25 - 5000 with the
film's DX code.
SEC.01 P013-028 (E) 28-01-2003 10:20 Pagina 27