Filter
Top Products
208
Troubleshooting Guide
If the image has been erase-protected, it cannot be erased (p.141).
Set the color space to sRGB. If Adobe RGB is set, the first character
will be an underscore (p.76).
If you use a card which already has images recorded, the file
numbering might start from the last image in the card (p.74).
The correct date and time has not been set (p.42).
Make sure the stereo video cable or HDMI cable’s plug is connected
all the way in (p.139,140).
Set the video OUT format (NTSC/PAL) to the same video format as
the TV (p.201).
Use the stereo video cable that came with the camera (p.139).
The printing effects displayed may differ depending on the printer. The
instruction manual lists all the printing effects available (p.158).
The image cannot be erased.
The file name’s first character is an underscore (“_MG_”).
The file numbering does not start from 0001.
The shooting date and time displayed is incorrect.
No image appears on the TV screen.
Printing-Related Problems
There are fewer printing effects than listed in the instruction
manual.