Filter
Top Products
Video 59
recordings while on land, we recommend using the [s Surface]
recording program.
- To switch the recording program between [r Underwater] and
[s Surface] while the camcorder is in the waterproof case, turn on
the camcorder while holding
j pressed down.
- p will appear on the screen when the camcorder's temperature
becomes too high. If this happens, turn off the camcorder, take it out
of the waterproof case and keep it in a cool place until the
temperature goes down. If the camcorder becomes too hot, it will turn
off automatically.
- When making recordings underwater with the [r Underwater]
recording program, the image on the LCD screen will appear redder
than the actual subject. This will not affect the recording.
- When a commercially available wide-converter or other accessory is
attached to the waterproof case, the camcorder may focus on the
accessory. In such case, move the zoom lever toward P to focus on
the subject.
- See Specifications (0 196) for additional notes about the
[r Underwater] and [s Surface] recording programs.
* Underwater is a unique environment that is ever-changing, depending on factors
such as the weather and water conditions. In addition, water absorbs red light,
which causes objects to appear bluer and greener.
Cinema Mode: Giving a Cinematic Look to your Recordings
Give your recordings a cinematic look by using
the [
D Cine Mode] recording program. Combine
this recording program with the 25 fps progressive
frame rate [D PF25] to get the enhanced effect
of the 25p Cinema Mode.
To set the [D Cine Mode] recording program
Operating modes:
[FUNC.] 8 [Rec. Programs] 8 [D Cine Mode] 8 [a]